The top ten USES common sense to protect the LED display screen running safely

The security operation of LED display is very important. The failure of LED display may be a problem of product quality or operational details. Product problems generally occur relatively few, many common failures and safety accidents are often caused by the error of operating details. The following are ten details that should be paid attention to in the use of the tsun photoelectric LED display:

           The security operation of LED display is very important. The failure of LED display may be a problem of product quality or operational details. Product problems generally occur relatively few, many common failures and safety accidents are often caused by the error of operating details. The following are ten details that should be paid attention to in the use of the tsun photoelectric LED display:

1. Switch sequence:

                         A: first, turn on the control computer to make it run normally, then open the outdoor LED screen;

                                B: first close the outdoor LED display, and then close the computer.

                                2. Timely replacement, special screws, pins, load-bearing beams, etc.;

                                3. Regularly inspect whether the anti-corrosion and anti-rust paint on the surface of products and steel structure welding points has fallen off. If there is peeling or rust, spray anti-rust paint or apply anti-rust paste in time;

                                4. The power supply shall be stable, and the ground protection shall be good. It shall not be used in bad natural conditions, especially in severe thunderstorms.

                                5. Check in the rainy season to determine whether there is leakage;

                                6. Check regularly whether the power supply and signal line have broken skin or bite;

                                7. Check the power distribution system of the product every six months;

                                8. Outdoor LED screens exposed to outdoor environment for a long time are prone to dust. Can use alcohol to wipe, or use brush, vacuum cleaner for dust removal, but can not directly wipe with wet cloth;

                                9. Test the single function of starting, stopping, brightness adjustment, program list and so on one by one according to the automatic presetting mode of LED display;

                                10. Outdoor LED display shall have a rest time of more than 2 hours every day, which shall be used at least once a week during the rainy season. Turn on the screen at least once a month for more than 2 hours.

                                Details determine success or failure, safety is everything. The above ten safe use common sense of topups photoelectricity summary, for your LED display running escort!